How to root Galaxy Tab ( English )
Root Samsung Galaxy Tab2 7.0 GT- P3100/P3110/P3113 ( 100% Tested )
Pre-Requisites
* Ensure download of appropriate USB drivers and enable USB Debugging mode
* Ensure back-up of all important data
* Ensure device is factory unlocked
* Ensure battery has at least 80 percent charge
To Root Samsung Galaxy Tab 2 7.0 (P3100/P3110/P3113) Using CF-Auto-Root
Download CF-Auto-Root package and unzip file
P3100
http://adf.ly/W3vWO
P3110
http://adf.ly/W3vYk
P3113
http://adf.ly/W3vbd
Download Odin v1.85
http://adf.ly/W3vdW
Switch device off and re-start in Download mode (to do so, press Volume Down and Power until warning message appears on screen and then press Volume Down)
Run Odin on computer
Connect device to computer using USB cable (while in Download Mode) and Odin should detect connection with an ID:COM box turning yellow and a message reading - Added
In Odin, click PDA, locate CF-Auto-Root and click Start (a successful installation will be followed by aa message from Odin saying - Pass - and an automatic reboot)
Unplug device from computer (after reboot) when Home screen appears
(Note: If Odin does not detect device, ensure USB drivers are properly installed)
Pre-Requisites
* Ensure download of appropriate USB drivers and enable USB Debugging mode
* Ensure back-up of all important data
* Ensure device is factory unlocked
* Ensure battery has at least 80 percent charge
To Root Samsung Galaxy Tab 2 7.0 (P3100/P3110/P3113) Using CF-Auto-Root
Download CF-Auto-Root package and unzip file
P3100
http://adf.ly/W3vWO
P3110
http://adf.ly/W3vYk
P3113
http://adf.ly/W3vbd
Download Odin v1.85
http://adf.ly/W3vdW
Switch device off and re-start in Download mode (to do so, press Volume Down and Power until warning message appears on screen and then press Volume Down)
Run Odin on computer
Connect device to computer using USB cable (while in Download Mode) and Odin should detect connection with an ID:COM box turning yellow and a message reading - Added
In Odin, click PDA, locate CF-Auto-Root and click Start (a successful installation will be followed by aa message from Odin saying - Pass - and an automatic reboot)
Unplug device from computer (after reboot) when Home screen appears
(Note: If Odin does not detect device, ensure USB drivers are properly installed)
